Indian members of the Maratha community in the state of Maharashtra take part in a rally in Mumbai on August 9, 2017.The Maratha Kranti Morcha silent protest is being held to demand emplyoment quotas for the Maratha in state-run education institutions and government jobs, a minimum support price for farm produce, and amendments to the Scheduled Castes and Scheduled Tribes (Prevention of Atrocities) Act. / AFP PHOTO / PUNIT PARANJPE
Indian Marathas take part in a rally in Mumbai in August 2017 to demand work quotas in state jobs and other benefits. Photo: AFP / Punit Paranjpe

When does a socially and politically dominant, relatively prosperous Indian caste get itself designated as “backward,” and thus deserving of affirmative action in the form of reserved quotas in government jobs and educational institution enrollment?

Answer: When Maharashtra state is a few months away from general elections – as it was in the latter part of last year – and local politicians see a possible way to switch the allegiance of members of the majority Maratha caste, who traditionally have voted for the Indian National Congress.

Now that the elections are about to begin, the question is whether the ploy – which has yet to overcome legal challenges – has worked out fully in the way that the Bharatiya Janata Party-led National Democratic Alliance (NDA) hoped.

Suggesting otherwise is the fact that, meanwhile, there are some angry Maratha activists – and it’s the BJP-led state officials they’re upset with.

The history

On July 23, last year, Dr Kanchan Patil was part of a Maratha protest group at the Sion-Panvel Highway when violence erupted in many places across Maharashtra during agitation for the caste’s special designation.

The group was raising slogans to press for their demands when some stones came flying from nowhere. The cops started cane-charging, and fired in the air to disperse the crowd.

“I and my other friends left the protest venue immediately and returned home. Next day I found myself booked for attempt to murder under section 307 of the Indian Penal code, among other serious charges,” said Dr Patil, who was granted bail later and is now bracing herself for a legal battle.

“We didn’t pelt stones. We were holding a peaceful demonstration when stones came from the other side of our gathering,” said Patil. Two other Panvel women, advocate Sulakshna Patil and homemaker Jayashri Dhapte, face similar charges.

“Over 7,000 demonstrators have been booked for serious criminal charges ranging from attempt to murder to rioting. These cases were registered only to curb our prolonged agitation,” Virendra Pawar, president of Sakal Maratha Samaj told Asia Times.

As the general elections approach, the anger of these activists is growing. “The state government had promised to withdraw cases but didn’t do that,” Pawar said. Locking in the promised quotas for the Marathas “has also been elusive so far.”

The Marathas are predominant in Marathwada/central (8 seats), western (12 seats) and north Maharashtra (6 seats) where 26 constituencies will go to polls in three phases – on April 18, 23 and 29.

The alliance of the BJP and Shiv Sena won 20 of the 26 seats here in the 2014 general elections.

These had been bastions of Congress and its offshoot and ally the Nationalist Congress Party (NCP), but 2014’s “Modi wave” restricted the opposition to just six seats – four for NCP and two for the Congress. These were the only seats won by the opposition in the entire state.

For the current elections, Congress-NCP and Swabhimani Shetkari Sanghatna (SSS) have fielded 25, 21 and 2 candidates, respectively, under the banner of the United Progressive Alliance. BJP and Shiv Sena will fight for 25 and 23 seats, respectively.

Key factors

Maratha anger coupled with the agrarian crisis could spell trouble for the NDA in this region, especially in the Marathwada region this time.

The BJP-Shiv Sena alliance’s campaign led by Hindu nationalist star Prime Minister Narendra Modi is built around national security, emphasizing the Balakot airstrikes on Pakistan as the chief poll plank on top of issues like polarization of communities and attacks on Congress and the Gandhi family, which were tried and tested in previous elections.

Congress and NCP hope their “basic minimum income” (Rs 72,000 a year) plan will hit a chord among people in view of the rising joblessness and agrarian crisis. A farm loan waiver announced by the BJP government in the state two years ago is yet to be fully implemented and people in the state worry about how to deal with yet another drought in these areas.

NCP spokesperson Nawab Malik said: “There is a lot of anger among farmers and youngsters due to the agrarian crisis, joblessness, caste tussle and the NDA government’s unkept poll promises. Dalits and Muslims are also angry with the regime. These issues may not be reflected in media reports but will help us to win at least a dozen seats in Marathwada, North and West Maharashtra.”

But BJP spokesperson Prem Shukla claimed: “We have given 16% reservation to the Maratha community by enacting a law which is currently being reviewed by the court.” Based on the alliance’s sweep of municipal elections, he predicted, “our tally will go further up.”

At a time when discontent among the Dalits (who were untouchables in the traditional caste system), Other Backward Classes, Dhangars (a herding community), tribals and Muslims could have jeopardized the NDA’s chances, the emergence of Prakash Ambedkar’s Vanchit Bahujan Aghadi in alliance with the All India Majlis-e-Ittehadul Muslimeen is likely to dent opposition votes.

Marathwada

The parched Marathwada, once part of Hyderabad’s Nizam, for a long time has been the epicenter of an agrarian crisis, with perennial drought, farmer suicides (4,100 in four years) and agitation by caste groups. The area has been a hotbed of Hindutva politics since Pramod Mahajan and Gopinath Munde established the BJP here three decades ago.

At present, of the eight parliamentary constituencies in Marathwada BJP holds three; Shiv Sena, three; and Congress, two.

The cash-rich Maharashtra Sugar Belt comprises 12 constituencies and was dominated by the Congress and NCP in the past. Congress-NCP (6) and BJP-Sena (6) got equal representation here in the previous polls.

The Congress-NCP alliance is fighting hard to regain its grip in the region. New political factors such as Raju Shetti’s switch to the opposition might upset the prospects of the NDA in a few seats. Congress is contesting three seats, NCP will fight on seven while SSS will field two candidates in the region.

North Maharashtra includes six lower house seats – Nashik, Jalgaon, Raver, Dindori, Nandurbar (Scheduled Tribes) and Dhule. NDA holds them all.

This time, the region, which is known for growing onions and grapes, faces drought that has hit the farmers hard. Underdevelopment of the region is another key factor.

BJP will contest five constituencies here while Sena will contest only Nashik. Congress and NCP will contest three each.

Despite tall claims, the NDA is expected to lose a few seats in all the three regions owing to rising joblessness, farm crisis and caste disagreements, say observers.

The opposition has its own miseries. Some of its members, including family members of stalwarts, have defected to BJP-Shiv Sena.

However, cashing in on anti-incumbency and the likely absence of any “wave” this time, Congress and NCP may be able to double their tally, from six to 12, in these regions.

“Congress and NCP lag much behind the ruling alliance,” said Mandar Parkar, a political analyst. “Had the opposition inked the alliance in time, taken more outfits into their fold and started campaigning aggressively a little early, they could have won some more seats.”

(This is the third of a three-part series. Click here for the first and second.)

Join the Conversation

1152 Comments

  1. Today, I went to the beach front with my kids. I found a sea shell and gave it to my 4 year old daughter and said “You can hear the ocean if you put this to your ear.” She put the shell to her ear and screamed. There was a hermit crab inside and it pinched her ear. She never wants to go back! LoL I know this is entirely off topic but I had to tell someone!

  2. I together with my friends have already been examining the nice guides on your web blog while all of a sudden I had a terrible feeling I had not thanked the website owner for them. The guys had been for that reason excited to see all of them and have in effect sincerely been making the most of these things. Thanks for actually being indeed considerate and for going for these kinds of very good themes most people are really eager to be informed on. Our own honest regret for not expressing appreciation to you sooner.

  3. Si se enfrenta a la tarea de producir miles de piezas pequeñas y complejas, Sandvik Coromant tiene las herramientas necesarias para ello. La dilatada experiencia en mecanización sobre plano, un equipo de profesionales cualificados y una infraestructura de última generación son claves para ofrecer el mejor servicio en el mecanizado de precisión.

  4. Disponemos de un amplio parque de tornos CNC equipados con robot para la carga automática de piezas a máquina. Y en serie, de piezas de recambio industriales. Mecanizados Lodoso fabrica sus productos con todo tipo de materiales: acero, inoxidable, plásticos técnicos, latón, bronces, etc. De la misma manera si el cliente desea únicamente un proceso de desengrase, le realizaremos también un estudio para obtener unos resultados que nos garanticen una tensión superficial en sus piezas controlada y repetible.

  5. La empresa de reformas Henss, de Feldkirch, más conocida como AUF&ZU, es un cliente muy satisfecho con HOLZ-HER y ahora posee una gran parte de los equipos de producción de los fabricantes de Nürtingen. A partir de productos semi-elaborados, como tochos lingotes (u otras piezas previamente formadas por otros procesos como moldeo forja), se realiza la remoción de material, principalmente, de tres formas.

  6. El primer paso es recopilar el diseño de la pieza en 3D, la información del material a emplear y el tratamiento de superficie que desea nuestro cliente. Serie DYNESTIC de HOLZ-HER: Ahorro de tiempo en la producción gracias a la tecnología Nesting de HOLZ-HER.

  7. El diseño ergonómico del Gigaset A400 convierte la comunicación en un placer, y la calidad de los materiales da al teléfono una imagen compacta. La lectura y navegación en la pantalla se realiza sin problemas, gracias a sus tamaño de 1.7” y fuente jumbo – y la pantalla está iluminada para ser legible, incluso bajo escasa iluminación. Su agenda para hasta 80 contactos con nombre y números permite almacenar tus contactos más llamados para que estén accesibles en segundos. El 90 por ciento de nuestros servicios son solucionado el mismo día que usted nos pida.

  8. Reparamos toda clase de electrodomésticos; además, disponemos de servicio de manitas a domicilio y reformas low cost. En el tramo que conecta los circuitos cerrados al dispositivo de alimentación se instalará una válvula automática de alivio que tendrá un diámetro mínimo DN 20 y estará tarada a una presión igual a la máxima de servicio en el punto de conexión más 0,2 a 0,3 bar, siempre menor que la presión de prueba. Un representante del Instituto Nacional del Consumo del Ministerio de Sanidad, Servicios Sociales e Igualdad. El presente real decreto entrará en vigor el día siguiente al de su publicación en el «Boletín Oficial del Estado». Llámenos, al igual que han hecho sus vecinos, y le solucionaremos su avería con la mayor profesionalidad y al mejor precio. Disponemos de la mayor red de técnicos de reparación de Frigoríficos en Murcia.

  9. El contenido de esta obra va desde el más simple de los circuitos frigoríficos a las instalaciones centralizadas del frío comercial, seguido por los compresores de tornillo y las instalaciones de frío industrial. Va desgranando los conocimientos poco a poco haciendo los temas más técnicos y complejos totalmente accesibles al nuevo técnico, profesional y crea verdaderos frigoristas competentes. También es interesante para el que desea iniciarse en esta materia, ya que expone de forma clara las bases del frío, los componentes de una instalación frigorífica, el funcionamiento de los equipos, el diseño y puesta en servicio de una planta de frío, etc. No cobramos gastos de envío por correo y reembolso en España) (108 dólares USA).

  10. La profesionalidad del servicio técnico Bosch le garantiza el óptimo tratamiento de su electrodoméstico, así como el uso del mismo. Gracias a los más de 15 centros de Asistencia técnica Bosch de que disponemos en Barcelona, Provincia y Girona le desplazamos un técnico a su domicilio en el mismo día de su llamada. Si Ud. tiene una avería en uno de los electrodomésticos Bosch le enviamos en un plazo de 4 a 8 h de su aviso un técnico Bosch para detectar la posible avería de su electrodoméstico y le realizamos un presupuesto previo sin compromiso de la reparación, si se acepta nuestros técnico Bosch procederán a reparar. Nuestros técnicos reparan todo tipo de neveras y frigoríficos Fagor en tenerife.

  11. I as well as my buddies appeared to be studying the excellent things found on the blog and so the sudden came up with a terrible feeling I had not expressed respect to the web blog owner for them. My boys happened to be passionate to read all of them and have in effect pretty much been making the most of these things. Many thanks for actually being simply thoughtful as well as for having some essential useful guides millions of individuals are really eager to be aware of. Our own sincere apologies for not expressing appreciation to sooner.