HARP IS so big and so fast: It can print an object the size of an adult human in just a couple of hours. CREDIT: Phys.org.

US engineers have developed a new, futuristic 3D printer that is so big and so fast: It can print an object the size of an adult human in just a couple of hours, which could be the future of manufacturing, Xinhua reported.

The study published recently in the journal Science online described the prototype 3D-printing technology called High-Area Rapid Printing (HARP) that can safely print both hard, durable parts and elastic, bouncy objects.

Some 3D printers on the market can rival HARP’s speed, but they are limited in print-bed size and can only print small parts, often one at a time, according to the study.

The printer is about four meters tall with a 0.23-square-meter print bed. It prints vertically and can print about 0.46 meters in height in an hour, meaning it can print single, large parts or many different small parts at once, the report said.

“If we could print fast without limitations on materials and size, we could revolutionize manufacturing. HARP is poised to do that,” said Chad Mirkin with Northwestern University.

It uses ultraviolet light to cure the liquid resins into hardened objects, and the process can print pieces that are hard, elastic or even ceramic, according to the study.

Unlike those laminated structures produced by common 3D printers, its printed parts are mechanically robust so that they can be used as parts for cars, airplanes and dentistry.

Resin-based 3D printer usually generates a lot of heat when running at fast speeds, which can deform the printed parts. To tackle this problem, the researchers project light through a window from below to solidify resin on top of a vertically moving plate, and put a nonstick liquid over the window to remove heat and then circulates it through a cooling unit, the report said.

Also, the 3D printer doesn’t have to reduce resolution to print larger pieces, and it uses high-resolution light-patterning to achieve ready-to-use parts without extensive post-processing.

Mirkin predicts that the printer will be available commercially in the next 18 months.

Join the Conversation


  1. I blog quite often and I truly appreciate your information. This great article has truly peaked
    my interest. I will book mark your blog and keep checking for new
    information about once a week. I subscribed to
    your RSS feed as well.

  2. Valuable information. Lucky me I discovered your site by
    accident, and I’m surprised why this twist of fate didn’t took place earlier!
    I bookmarked it.

  3. Thanks for every other informative blog. Where else may I am
    getting that kind of information written in such an ideal approach?
    I’ve a project that I am simply now running on, and I have been on the look out
    for such info.

  4. I’m truly enjoying the design and layout of your blog.
    It’s a very easy on the eyes which makes it much more enjoyable for
    me to come here and visit more often. Did you hire out a developer to
    create your theme? Exceptional work!

Leave a comment

Your email address will not be published. Required fields are marked *